Dosyalar

A115

ALP NO DIMENSION Ød ØD b B C
A115-019 PU 19,05X25,4X6,35 19,05 25,4 6,35 6,98 3
A115-022 PU 22,23X28,58X3,18 22,23 28,58 3,18 3,51 3
A115-025 PU 25,4X31,75X6,35 25,4 31,75 6,35 6,98 3
A115-025/1 PU 25,4X34,93X4,76 25,4 34,93 4,76 5,28 4
A115-025/2 PU 25,4X34,93X7,94 25,4 34,93 7,94 8,71 4
A115-025/3 PU 25,4X38,1X6,35 25,4 38,1 6,35 6,98 4,5
A115-028 PU 28,58X38,1X4,76 28,58 38,1 4,76 5,28 4
A115-028/1 PU 28X40X9 28 40 9 10 4
A115-030 PU 30X40X6 30 40 6 7 4
A115-030/1 PU 30X40X9 30 40 9 10 4
A115-031 PU 31,75X38,1X6,35 31,75 38,1 6,35 6,98 3
A115-031/1 PU 31,75X41,28X7,94 31,75 41,28 7,94 8,71 4
A115-038 PU 38,1X47,63X7,94 38,1 47,63 7,94 8,71 4
A115-038/1 PU 38,1X47,63X9,53 38,1 47,63 9,53 10,49 4
A115-038/2 PU 38,1X50,8X9,53 38,1 50,8 9,53 10,49 4,5
A115-040 PU 40X50X6 40 50 6 7 4
A115-044 PU 44,45X53,98X9,53 44,45 53,98 9,53 10,49 4
A115-047 PU 47,62X57,15X9,52 47,62 57,15 9,52 10,48 4
A115-050 PU 50,8X60,33X9,53 50,8 60,33 9,53 10,49 4
A115-050/1 PU 50,8X63,5X9,53 50,8 63,5 9,53 10,49 4,5
A115-057 PU 57,15X69,85X6,35 57,15 69,85 6,35 6,98 4,5
A115-063 PU 63,5X76,2X9,53 63,5 76,2 9,53 10,49 4,5
A115-076 PU 76,2X88,9X9,53 76,2 88,9 9,53 10,49 4,5
A115-076/1 PU 76,2X95,25X15,875 76,2 95,25 15,875 17,47 5
A115-088 PU 88,9X101,6X9,53 88,9 101,6 9,53 10,49 4,5
A115-092 PU 92,08X101,6X9,53 92,08 101,6 9,53 10,49 4
A115-105 PU 105X120X9 105 120 9 10 4,5
A115-107 PU 107,95X127X15,88 107,95 127 15,88 17,47 5
A115-109 PU 109X125X10,5 109 125 10,5 11,5 4,5
A115-152 PU 152,4X171,45X15,875 152,4 171,45 15,875 17,47 5

A115 seals are designed to be used in both piston and rod applications.
Thanks to the O-Ring between the sealing lips, there is no in sealing performance loss under low pressures. 
A115 seals have a design decreases reaction time of sealing lips during peak pressures or sudden changes. 

TECHNICAL DATA
Working Pressure 400 Bar
Working Temperature -40/+100°C
Sliding Speed 0.5 m/sn
Material 92 PU / 70 NBR
Media Mineral Base Hydraulic Oil
Surface Roughness
  Ra Rmax
Dynamic Surface ≤0.4 μm ≤3.2 μm
Groove Base ≤1.6 μm ≤10.0 μm
Groove Flanks ≤3.2 μm ≤16.0 μm
Permissible Gap (max.) 
Cross Section Pressure (Bar)
150 250 400
≤5 0.30 0.20 0.15
>5 0.35 0.25 0.20